| Story Views | |
| Now: | |
| Last Hour: | |
| Last 24 Hours: | |
| Total: | |
Was a Tesla Type Weapon Unleashed on the Twin Towers? Were TV Viewers Manipulated Into Believing a Commercial Jet’s Aluminium Wings Cut Through Several Feet Of Thick Steel?
Wednesday, January 30, 2013 9:21
% of readers think this story is Fact. Add your two cents.
You have had 11 years to examine the spec sheets to see that not only was the exterior skin of the WTCs only 7/16 to 1/4 inches thick, you have had every opportunity to see the limited but existent damage to the floor levels impacted by the jets, and the remains of these jets as well. Observe the large white flash of the jets igniting the thermite which had been sprayed on the interior surfaces of all of the structural steel of these two buildings. The portion of the exterior wall ignited was limited by the custom work done by WTC insiders.
Judy Woods uses defective logic. She also uses her education in the engineering field to lie so laymen can not catch her at it. I,personally, documented the preset demolition system, minus the nanothermate but including the use of nukes, back in 1969. But nobody cares. I have a good life in Hawai’i, so contact me at [email protected] for TRUE answers to your questions.
You morons need to read the spec sheets. The exterior steel was a convoluted and welded assembly of 1/4-7/16 gauge steel, designedto behave like unibody automobile construction. This thin material was spray painted with old school thermite during construction, when nukes were placed sub-basement. Nanothermate was loaded after 1998, when it was patented, to cut the cores and initiate the preexisting apparatus. This is why the puzzlement as to ‘how the hell did they do that?’. They did 99.9967…% of the work during construction. apparently the nuke fuel was renewed periodically or perhaps just once for the sacrifice to Molloch.