Online: | |
Visits: | |
Stories: |
Story Views | |
Now: | |
Last Hour: | |
Last 24 Hours: | |
Total: |
The Quad Anchor is a versatile method to equalize any anchor, but in this tech tip, we will focus on how to apply in a 2 point anchor scenario. You will most commonly use this when you have a 2 bolt anchor and the advantages to using a Quad Anchor are many:
What you will need to build a quad anchor:
Steps:
2. Tie an overhand knot on either end of the cordelette. You should now be looking at 4 strands in the middle and two loops on either end. Keep them a little loose so you and slide the closer together or further apart depending on how much lateral movement you are going for.
3. Clip your SMALL locking carabiners to the loops on either end of the cordelette. You will clip this to each of the two bolts.
4. Clip your LARGE locking carabiners to 3 out of the 4 strands in the middle. For best practice, make sure you opposite and oppose them. The reason why you clip only 3 out of 4 strands is because if one bolt fails, the carabiners will be trapped inside the 4 strands and not fall of the end. Another option is to clip one larger locker to 2 of the strands in the middle, and your other large locking carabiner to the other 2 strands.
5. Voila, you now have a perfectly constructed self equalizing quad anchor rig that you can set up your top rope with.
The post Chick Beta: Quad Anchor appeared first on Chicks Climbing.
To see the latest Chicks with Picks and Chicks Rock! clinic schedule check out http://www.chickswithpicks.net/