| Story Views | |
| Now: | |
| Last Hour: | |
| Last 24 Hours: | |
| Total: | |
How to Sight in Your Scoped Rifle With a Single Shot
I remember getting my .30-06 as a present for my 18th birthday. Well, what I got was an unfinished stock, a barreled action, and a fixed 4x scope.
After finishing the stock (I use that term loosely since I never wanted a fancy rifle), I took my rifle to the local gunsmith and had him mount the scope. He bore sighted it, sold me a box of ammo, and sent me out to his range.
I had a scoped .22LR at the time. I had mounted the scope myself, bore sighted it, and started shooting and adjusting my windage and elevation after each shot. It worked beautifully.
Have you ever fired a .30-06 with no wussy pad while wearing only a t-shirt for “padding?” The gunsmith came out after the 12th or so shot fired to see if everything was going okay, and I said it was.
I think the 18th shot finally hit where I aimed, and that was about how many shots it took for me to get that .22LR dead on back when I sighted it in. Eighteen shots and my shoulder felt a bit sore, but my rifle was ready for hunting season.
Of course, the next day, my shoulder was more than a bit sore. Eighteen shots with a .22LR rifle vs. the same with a .30-06. Plus, ammo costs money. Lesson learned.
It was many years later that I figured out a much easier way to sight in a scoped rifle, which was when my original scope fogged and I had to replace it. That was one of those “ah-ha!” moments.
Here’s how you do it:
- Bore sight your rifle to get on the paper.
- Using whatever means available (sand bags, for example), steady the rifle so that it is rock solid with the scope aimed dead center on the target. You should be able to get in position and not have to worry about your breathing or making any adjustments. Just put your shoulder to the butt of your rifle, look through your scope to ensure it is aiming where it should be, and…
- Fire one shot at the target.
- If the rifle moved with recoil, reposition the rifle so that the scope is once again aiming dead center on the target.
- Without moving the rifle, adjust your scope’s windage and elevation (walk the sight) until it is aiming dead center in the hole the shot made in the target.
Your scope is now pointing exactly where it should be: the point of impact. Your next shot, if you want to make sure, will hit where you aim.
Since most times the first shot after bore sighting is done at closer range than what you want to be able to shoot out to, this may take two shots: one at close range and one at the longer range you want. Barring any wind impacting the bullet trajectory, you will be dead center vertically taking that second, longer range shot and once again will walk the sight to the hole in the target.
Please visit TheSurvivalistBlog.net to read the full article…
Brilliant!
Very useful and a “saves you money” idea. Went out, tried it with my kid’s new yard sale find Winchester 308 he just picked up, and yes it worked beautifully. Thanks…