By Alton Parrish (Reporter)
Contributor profile | More stories

A NASA’s Mars Curiosity rover team member gives an update on developments and status of the planetary exploration mission. The Mars Science Laboratory spacecraft delivered Curiosity to its target area on Mars at 1:31:45 a.m. EDT on Aug. 6, which includes the 13.8 minutes needed for confirmation of the touchdown to be radioed to Earth at the speed of light.   The rover will conduct a nearly two-year prime mission to investigate whether the Gale Crater region of Mars ever offered conditions favorable for microbial life.

 

A pinch of fine sand and dust became the first solid Martian sample deposited into the biggest instrument on NASA’s Mars rover Curiosity: the Sample Analysis at Mars, or SAM.

Located inside the rover, SAM examines the chemistry of samples it ingests, checking particularly for chemistry relevant to whether an environment can support life. Curiosity’s robotic arm delivered SAM’s first taste of Martian soil to an inlet port on the rover deck on Nov. 9. During the following two days, SAM used mass spectrometry, gas chromatography and laser spectrometry to analyze the sample.

The sample came from the patch of windblown material called “Rocknest,” which had provided a sample previously for mineralogical analysis by Curiosity’s Chemistry and Mineralogy (CheMin) instrument. CheMin also received a new sample from the same Rocknest scoop that fed SAM. SAM has previously analyzed samples of the Martian atmosphere.

“We received good data from this first solid sample,” said SAM Principal Investigator Paul Mahaffy of NASA Goddard Space Flight Center, Greenbelt, Md. “We have a lot of data analysis to do, and we are planning to get additional samples of Rocknest material to add confidence about what we learn.”

NASA’s Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena, manages the Mars Science Laboratory Project for NASA’s Science Mission Directorate, Washington. JPL designed and built the rover.

 

Contacts and sources:

Jet Propulsion Laboratory

 

Comments

Your Comments