Tepco installed “fibrous adsorbent purification system” into the seawater of reactor3

(Before It's News)

According to Tepco, they installed a new purification system into the seaside of reactor3.

The system is described as “fibrous adsorbent purification system”, but it only adsorbs Cs-134/137 among all the leaking nuclides.

It was installed inside of the silt fence at 14:00 6/17/2013.

As a trend, the radioactivity density in seawater of reactor3 is significantly higher than reactor1, 2 and 4. Tepco has made no explanation about this.

(cf, Radioactivity density in seawater of reactor3 reached the highest reading since 2/1/2013, 5 times much as reactor2 [URL])

http://www.tepco.co.jp/nu/fukushima-np/handouts/2013/images/handouts_130617_05-j.pdf

http://photo.tepco.co.jp/date/2013/201304-j/130403-01j.html

http://www.tepco.co.jp/nu/fukushima-np/roadmap/images/d130328_05-j.pdf

• [Express] “Radiation level is roughly 50% higher in Sumida ku than west part of Tokyo”
• [Express] “300 Bq/Kg in the park of Konanku Yokohama city”
• Tepco to finally investigate why reactor1 temperature goes up when they stop nitrogen gas injection
• Remote controlling helicopter crashed after monitoring radiation level in 5km from Fukushima nuclear plant
• [Mystery] Upper parts are more contaminated on the first floor of reactor2
• 6,700,000,000 Bq/m3 of all beta detected from the leaking water of multiple nuclide removing system
• Former decontamination volunteer in Fukushima had a cancer in his throat
• 19,000 Bq/Kg from the drain of balcony in Setagaya Tokyo, May 2013
• Multiple nuclide removing system ALPS possibly leaks in the test operation
• Media started reporting increasing heart attack of youth, “It’s due to having too much fast food”